C-AJJ4007 FRONT BUMP STOP KIT
Remove existing bump stop rubber completely.
The smaller hole of the new Bump rubber should be fitted over the retainer on the bracket, using hand soap or brake fluid on the rubber if necessary to ease the fitting. It is advisable to put the metal bracket in a vice so you can get leverage on the rubber. Bolt holes in the bracket will have to be enlarged slightly if shock absorbers are fitted or shock absorber kit C-AJJ3362 is to be fitted to hydolastic cars.
Contents:
2 x C-AHT246 brackets
2 x AHH9158 bump rubber